Forum BMH

Bonjour, je suis en utilisant Google translate, je suis désolé, je ne parle pas français.

Je ne sais pas comment vous le dire en francais, "dashboard"



comment puis-je supprimer?

est-il difficile?

y at-il un poste quelque part que je peux lire s'il vous plaît?

_____________________________________________________________________



qu'est-ce que vous mentionnez en francais, quand vous dites "pont" - differential ? -



lol -
J'espère que vous pouvez comprendre cela et pardonnez-moi


_______________________________________________________________________

do you guys know anything about changing the differential ratio , to achieve a higher cruising speed / less noise?

there are pictures of Chinese differentials at the bottom of this page

http://bbs.fblife.com/thread_944300_5.html

Hello,

"dashboard" in french "tableau de bord"


You search a help to take your dashboard out? Is it OK?


For the "pont", it's the set between both wheels, it's not only the differential!

For example...



Sorry for your English language....

To take out your dashboard, it's very easy, you have only some "bolts" which maintain the dashboard.
You must do that little by little.

Merci!

I would like to reduce the noise from the engine. so i would like to remove the dashboard.

pont = "axle" en anglais



merci )

Maybe some ideas to reduce the noise from the engine....in these messages....

viewtopic.php?f=53&t=9199&p=107279&hili ... ur#p107279

Good luck for the work!

hello Ned,

the cro magnon familly answered you well already,

I just add that link where you can see pictures where I took the dashbboard out to put some insulation behind....
but I think the most efficient was to cover on the engine side and around the gear stick that allows the noise going up this way.
viewtopic.php?f=8&t=768

do you know what ratio you have currently because there are 3 differents depending on the model.
even the longest is not very fast though, there have been some attemp to mount a 4x2 iveco version but they are not all compatibles... we did talk about that on other topics...although I understand it's not easy for you to read through.
viewtopic.php?f=2&t=4703&hilit=rouler+p ... e&start=20

and off course to begin with you can use the 900r16 tire size instead of the 750r16... if you haven't already done it.

the fastest ratio on a 4x4 iveco from those generations is 9x47,
it is difficult to estimate the amount of theeth on the small one on that picture from the link you gave us but the big one has only 46 theeth. would be interesting to know what is the actual ratio and if they did manage making it go faster ?
how come you ended up on that forum ? do you talk chinese yourself ?

just for information, on that other topic we were talking about the ratios that are generally used: 9x47 and 7x41
I do not have in mind what was the 3rd one.

viewtopic.php?f=7&t=4207&p=43569&hilit= ... que#p43569

actually the 3rd one would be 7x43 if we trust this topic:
viewtopic.php?f=2&t=4888&p=51955&hilit= ... que#p51955